The product you requested could not be found. Perhaps you used an expired link or bookmark. Our current catalogue can be found below:

Metis 5

Metis 5 - Integrated Amplifier

A set of new Metis analog audio components has been created by Goldmund, replacing the company’s former SR line at even lower costs despite their much improved performance. Their Mechanical Grounding Construction is simply remarkable and eliminates all spurious vibrations affecting the signal quality. The new line also presents an integrated Amplifier, the Goldmund Metis 5. With an exceptional performance and a minimum form factor but also with the incomparable Goldmund metal finish and engraving, it is the typical integrated amplifier any young Goldmund amateur with a limited space or budget was looking for.

The Metis 5 includes both the Metis 2 and Metis 3 circuitry in a diminutive chassis the size of the existing Metis 10 (370 L x 300 W x 600 H mm). With 2 x 150W Telos circuits, it provides outstanding dynamics to any speaker. In addition, it is extremely easy to use and can be quickly installed in any system.

The Metis 5 front panel includes a volume control and an input selector knob, the IR receiver for the remote control, and a display for the playback level and input selected. It has 5 pairs of RCA inputs (right & left) and 2 pairs of output speaker connectors (right & left).

For additional information on the Metis Line, also see the Metis 2 Analog Preamplifier, the Metis 3 Analog Amplifier, the Metis Subwoofer and Speakers and the Metis 10 Processor.

  • FRONT PANEL CONTROLS

    • Volume Control
    • Selector Input Switch
    • IR Receiver for Remote
    • Display of playback level
    • Display of input selected
    • Power led

  • BACK PANEL CONTROLS

    • On/Off switch
    • Power cord socket 3 lugs
    • Inputs
    • Outputs

  • INPUTS

    • 5 pairs of RCA inputs (right and left)
    • Input impedance: 50 kOhms
    • Maximum input level (unbalanced): 3.6 V RMS

  • OUTPUTS

    • 2 pairs of output Speaker connectors (right and left)

  • POWER SUPPLY

    • 3 toroidal transformers
    • 3 separated power supply
    • Power cord socket (3 lugs)
    • Mains fuse (5A slow-blow).

  • GROUNDING

    • Separated ground and earth signal
    • Connection between earth and ground to cancel all ground loops

  • SAFETY FEATURES

    • Automatic switching to MUTING if the AC line drops or is interrupted

  • POWER

    • Nominal line voltage: 117 V or 234 V
    • Input voltage range: +/- 10 %.
    • Maximum power consumption: 400 W
    • Power used in standby: 23 W

  • CIRCUIT SPEED

    • Rise time: < 800 ns.

  • FREQUENCY RESPONSE These values for any level to maximum output level

    • +/- 0.15 dB, 10 - 20 kHz
    • +/- 0.6 dB, 10 – 100 kHz
    • +/- 1.2 dB, 10 – 200 kHz

  • DISTORTION With 1 Vrms output level, 80 kHz measurement bandwidth, 600 ohms termination impedance

    • THD unbalanced in to balanced out 0.01 % flat with frequency
    • IMD unbalanced in to balanced out 0.01 %

  • NOISE

    • Signal-to noise ratio on line input: > 80 dB (0.01 Hz - 10 Mhz)
    • Weighted ASA A: > 90 dB

  • OPERATING TEMPERATURE

    • Room temperature: -30 to +40 degrees Celsius ( -22 to +104 degrees Fahrenheit)
    • Internal temperature: +45 to +65 degrees Celsius ( +113 to +149 degrees Fahrenheit)

  • SIZE AND WEIGHT

    • Amplifier: 350 mm (13.77") W x 276.5 mm (10.88") D x 60 mm (2.36") H

    • Packing Box: 440 mm (17.32") W x 370 mm (14.56") D x 120 mm (4.72") H

    • Total weight: 9 Kg (19.84 lb)

    • Total weight with the box: 10 Kg (22 lb)

  • WARRANTY

    • 3 years, parts and labor.
Download User Manual