GOLDMUND - Swiss Made High-End Audio Equipment

Special Configurator program is needed to configure a Mimesis 30 in a specific system. It may be installed easily on any Windows operating system and it is also used to download the resulting configuration to the Mimesis 30.

The new configurator version has two additional functions:

• Fine step delay tuning
• Video and audio synchronization

In order to upgrade the version of your Mimesis 30, please follow the procedure below.

1. Download part
   • Download the program: M30_Setup.exe (Setup version 1.10, 02 May 2005)
   • Run the program and follow the installation stages.
2. Mimesis 30 software installation part
   The upgrade program is an enhanced version of the previous programs. The upgrade process takes place automatically without need to select individual files.
   • Connect your Mimesis 30 to your computer using a RS232 null modem cable and power ON your machine.
   • Double-click on the icon M30conf located on your computer desktop. A message asks you if you want to upgrade your Mimesis 30. Click Yes.
   • A second window appears, click Proceed. The upgrade task begins. It lasts about 35 minutes. Do not use your computer during the upgrade task. At the end of the upgrade, the configurator appears. The upgrade of your Mimesis 30 is complete. Please read the Configuration part below to configure your machine.
3. Configuration part
   • The configuration files which you customized for your system in the previous release are compatible with the new configurator.
   • Click on Load a configuration file and select your configuration file. If you do not have a customized configuration file, use DefConf_customer.dat
   • The file is located in the directory \M30.
   • The configuration edition takes place in two stages:
     • Configure your Mimesis 30 as desired.
     • Please consult the file M30Conf.pdf for further information. This file is available in the Start Menu at the path:
       Start\Programs\Goldmund\M30\Documentation...
     • Upload your configuration into your Mimesis 30.
   • To tune fine delays, you can reedit your configuration and use the Test button to load new delays into your Mimesis 30 for verification.
   • After having finished editing your configuration, save it by clicking on Save configuration to file.
   • Upload your configuration into your Mimesis 30 by clicking on Upload configuration into M30.

Note: for future use, a shortcut of the configurator program is available on your computer desktop as well as in the Start Menu at the path:
Start\Programs\Goldmund\M30...

If you need to remove the installation, it is recommended to do it properly using the program Uninstall.exe, available in the Start Menu at the path: Start\Programs\Goldmund\M30...
All directories and files are removed apart from the user customized files: *.dat.